Q4 map sensor data (PRT06)

[MaxiBoost]

Hello ,

You know I`m a Q4 owner like you ,
several years ago ,
when I only turbo boost rise up and drive my car ,
When no any wideband and no any egt display !

one time Im use very bad quality fuel ,
than 10 minutes later engine broken ...

one time car fuel pump`s pressure going low ,
engine broken ...

its like joke ,isnt it ?


Than I understand what I need .
Im last two years working on this electronic car displays .

I know ,who car users need what type display?.

-We must read all info same time on the display !
separete boost display ,afr display ,egt display are no good !

-When we race or fast car use ,we never watch the display !
than Im add alarm function ,max egt ,max rpm ,max boost etc
with high power led and high loud buzzer !

-We can record all infos same time to our notebooks. (logging function)


Im sell here (Turkey) many display for all brand car .


its NOT work with ecu diagnostic port ,
its work with direct sensor connection ,


for example ,
innovate LC-1 lambda out ,(AFR ) (compatible to plx,zeitronix,etc)
EGT sensor (a digital egt circuit include)
Map sensor (impreza map sensor or our Q4 sensor etc )
Duty signal from enjectors
Rpm signal from ecu out ,
Volt or water temp sensor if have
Throttle position sensor from ecu in












Also I have add "engine lean alarm function"
if rpm >4000
if duty >%50
if tps >80
we are race on the road ..
than if the afr >16 (its lean)
all the leds on and alarm sound on ..

Also Im add a duty out port ,
for water injection or nos out port ,
what you want its active after the duty value ,
in setup you change duty value

I have a user manual but its turkish ,
I cant post it ..

I add a ECON sign on lcd display ,
when the car cut-off mode (injectors off)
light econ on the lcd ,

I can log all data to excell .
it is a serial out port .


Im working on some other project too ,
for example knock monitor ,
Now Im use it on my car but it`s prototype ,
my lcd show me knock also ,
its work from our knock sensor,
it is same time FM radio out !
Im listen knock signal my cars radio





for example squential shift light ,
its nine high power led,
and we give seperate rpm value each led!


for other example ,
4x egt with 4x lcd ! (four 2x8 lcd )
this project I make my friend ,
He is starting at least 800 HP subaru impreza project
They are tune engine my egt displays




other impreza gc8,
he is use zeitronix wideband and egt ,
and he is connect lcd on the dashboard,its look like original.





blue screen.




so ,

@Evodelta ,
I know @barnacle`s fiat coupe display solution ,
its work on fiat-alfa diagnostic interface port ,
its compact ,just connect interface port and give power ,
but mine seperate direct sensors input ,so you can use it many different cars ,
and mine display have AFR ,EGT input. (EGT circuit include)
logging function ,alarm functions,out etc .

Price is :
Im sell it in turkey 350 YTL .
350 ytl is ;
~145 pound
~185?
~290$




@jimnielsen ,
All the car egt sersor is
TYPE K thermocouple ,
You can use any brand good quality EGT sensor ,
Im connect egt probe ,very close engine ,
before the turbo ,on the ext manifold .



You can watch old videos here if you want ,
http://www.youtube.com/user/Maxiq4

regards



NOTE:
Im changed some words for correcting