I'm looking for a complete Samco hose kit for my Q4, and also a place to buy it. I would like kits to both Turbo and Coolant.
Anybody know where to get such? Or which kit for the Delta Integrale that will fit?
Any help would be much appreciated ..
I'm looking for a complete Samco hose kit for my Q4, and also a place to buy it. I would like kits to both Turbo and Coolant.
Anybody know where to get such? Or which kit for the Delta Integrale that will fit?
Any help would be much appreciated ..
Alfa Romeo 155 Q4 Widebody - 1995 - Blue Nord Metal - See garage
Far as I know it is not possible to buy one for a Q4, also don't think much (if any) of the Fait/Lancia hoses fit...sorry
wrinx
My Q4 in the Garage
www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk
In a world full of compromise...
...some don't.
___________________________
Opel Astra Sports Tourer 110HP 2017
Alfa 147 1.6 16V 120HP
Alfa 155 Q4 2.0 16V turbo
How sad.. :/
What do you suggest to do then? Or should I just keep the original?
Alfa Romeo 155 Q4 Widebody - 1995 - Blue Nord Metal - See garage
So true ...
Ik think you should customize your own. At least, that is what i willl do when hoses are gone and needs replacement. Most hoses aren't available anymore or will get the status very soon.What do you suggest to do then? Or should I just keep the original?
I have some ideas, don't know if it is posible. When the time is ready, i'll post pictures of what i had in mind. (may take a while )
Greetings,
Marc
In a world full of compromise...
...some don't.
___________________________
Opel Astra Sports Tourer 110HP 2017
Alfa 147 1.6 16V 120HP
Alfa 155 Q4 2.0 16V turbo
Well, I guess that is what I have to do then..
Alfa Romeo 155 Q4 Widebody - 1995 - Blue Nord Metal - See garage
I am needing some hoses, if anyone finds some fitted to other cars please share the information
But...I think some will have to be specially made, when I have time I plan to take the water reservoir pipe and water pipe from under the inlet plenum, to a silicon pipe maker!
Other water pipes will probably be needed eventually but might be easier to find...
I'm also looking for the top breather hose now, mine is cracked
wrinx
My Q4 in the Garage
www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk
Hello,
had the same problem last summer, the waterhose under the inletmanifold from WP to Thermostat couldt be replaced by a siliconhose from Lancia delta, i bought this from Bielstein; lacia parts www.bielstein.com
Regards Michael
for the other hoses I think you have to ask them
Which one do you mean...number 10 in the first picture?
Number 8 in this picture caused some problems, had to fabricate some metal elbows! But would really like to replace with silicon, it fastens to number 10 above.
wrinx
My Q4 in the Garage
www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk
hello wrinx,
yes #10 ,first pic, the one Bielstein delivers is silicone made with the small conector made of solid aluminium, fits quite well , but a mess to change it with engine in the vehihle, I removed the throttelbody to get access to the hose.
Regards Michael
I have changed #10 in the first pic in my car too, and actually I made a hose from a Fiat Punto fit
The punto hose had a separate connector, where you could mount a hose on each side. Worked (and still works) quite well, and the connector won't be an issue, only the hoses..
Alfa Romeo 155 Q4 Widebody - 1995 - Blue Nord Metal - See garage
Interesting...I made my own (see pics - host not available!) but would rather have a proper part!
wrinx
My Q4 in the Garage
www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk
Groan...now I need number 24 as mine is split!
Should be ok with this as it's shared with the Fiat Coupe....
wrinx
My Q4 in the Garage
www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk
I think a standard Samco 16mmx102mm 90deg elbow (cut down) will do the job...just need to check the size (edit: steel pipe is 16mm).
I split three hoses trying to get the 'stat off!!! Thankfully only this one is a preformed part.
wrinx
Last edited by wrinx; 09-02-08 at 17:59.
My Q4 in the Garage
www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk
Bookmarks