Thank you all for the welcome. : D
*I was watching the post a bit and it looks interesting. Also, I would like to put Brembo, Italian car, Italian brakes, hahaha. Brembo is a whim that I have, beyond which there are surely other very good ones too.

I was seeing that the Brembo of the Alfa GT, can get to be placed in a good way, since the Alfa GT carries 286mm discs. What I do not know, is the issue of support, although I suppose I'll have to do it if it's not plug and play.
*If a pair of Alpha GTV for example, or any other that carries 305mm discs, could take place, it would be a lottery since they are somewhat larger grippers. Does anyone know if it can work?

*There is an Abarth (2012) that brings brembo and discs of 286x28, I think that was the measure, but I have not seen a sale of those tweezers. That to get them, you can save the distance 22-28mm with a thicker pill, or just the common pill, just that the piston would be something more out. Or, in this case, given that the Alfa has 5 holes and the Abarth 4, make a disc for the measurement of the Alfa in one of these places that makes racing brakes and are not so expensive.

*http://www.frenosdoppler.com/shop/di...ados-planos-2/
or
http://www.frenosft.com.ar/catalogo_....asp?ID_PROD=5

*I found this post http://hexenberg.free.fr/75/disque_m3_etrier_brembo.htm

Here it says that in 15 "wheels you can place 305 discs, with a spacer, which is the least, while between the clamp ... Will it really take place?
I would like to know where I can get the measurements of the GT clamps or any that carry 305 discs.