ordered parts for mounting 2 disc Tilton clutch from scara73, some issues with sending but I hope he will send it 3 weeks after order alteast . Didnt order gears for oilpump due that I didnt know if good or not
ordered parts for mounting 2 disc Tilton clutch from scara73, some issues with sending but I hope he will send it 3 weeks after order alteast . Didnt order gears for oilpump due that I didnt know if good or not
upgrade of front and rear brakes, any suggstions?
Do you have a budget in mind?
Very cheap is a pad upgrade; cheap is the 166 Brembo conversion (which is very good) and then there's the other end of the spectrum for eight pot calipers etc.
wrinx
My Q4 in the Garage
www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk
'
Right, If I got a pile of money I wouldnt be struggeling with an old alfa giving me a hardtime everytime I solve a problem Another appear
calipers from 166 with 330mm disc, thats a good start, and for the rear?
My budget is 1500 euro for front and back.
I have tried to only install huge Tarox 6 pot calipers with 330mm discs in front and stock at rear on a GTV916 and that was horrible, no control of the back end while braking.
Q: How to connect and install original rev with VEMS 3.4?
The Engine is running nicely on E85 but how does original revcounter work, we are unable to get the signals right?
Answer:
BC36 pin 31, P259 push, 480ohm, not BC18 pin 4 as we been told
Last edited by Norling; 01-02-16 at 13:31.
Saw some pictures some time ago on the front subframe but with wishbones fitted with uniballs, does anyone have pictures of it?
Crister Borg
Kalmar, Sweden
Alfa Romeo 155 q4 -93
Bookmarks