2199 Alfa Romeo 155 Q4 (2012-11-21 20:10:38)
2199 Alfa Romeo 155 Q4 (2012-11-21 20:10:38)
Thought they might be. Very impressive work!
Keep us posted on developments.
Jack
1993 Alfa Romeo 155 Q4 , 2.0 Turbo
The frame is up, 12cm from the original body down to the ground. I have no idea what it is from the beginning but this is low. We are about to decide how wide it should become.
http://www.alfapower.nu/gallery.php?g2_itemId=154957
A real monster here! Nice work mate
Some very nice work going on
Alfa 155 Q4 skinny
Alfa 155 2.0 8v skinny rolling shell being cut up to repair the Q4
Alfa 155 black wb coupe 20vt engine STAYING NOW
Alfa 155 White widey soon to be 20vt
Alfa 155 2.5 v6 white skinny NEXT FOR SALE
Will build alfa 155 or 145 into 20vt or 16vt or diesel's or selepeed's pm me
Are you going to try and get a flat floor to the car with some ground effects going on?
1994 Alfa Romeo 155 Q4: Dozeing in the garage.
2009 Audi A4 tdi: Everyday drive.1994 Alfa Romeo 155 , 1995cc Std Standard Black
Yes, flat floor, Venturi in the rear, Lancia Delta rear bellhouse, 2000mm wide, 14cm lower then original. I am allowed in Sweden to build a street legal car who is to extreme for racing i sweden regarding noice, hp and some other modifications. Its strange how the environment regulations can kill an entire sport in one blow. Regulations for tracks are 95dba, the track who is only 5min away from where I live who for 3 years ago was the nr 1 track in Sweden but due to all insanity from the goverment is now almost broke, because even lower noice then 95 dba is allowed, driving is only allowed 20 weekend per year, 5pcs of days can be sold with NO soundregulations for an huge amount of money, driving on the track is only allowed 3 out of 5 days during the week. This is why I build a street legal car with a touch of racing I will not be able to compete with this car in regular racing but who cares?!
Some assembly required then?
1994 Alfa Romeo 155 Q4: Dozeing in the garage.
2009 Audi A4 tdi: Everyday drive.1994 Alfa Romeo 155 , 1995cc Std Standard Black
Can u do some measurements before u weld it up? we could make some copy's from that....
we have started to install the rollcage. it doesent follow the body as good as I expected. What kind of measurment do you want?
Complete measurment. angles and lenght of all pipes.. how many pcs are there and so on.. its realy easy then to make a copy and make it fit well..
not that found of giving you all the data so you can make one for your self. By one and make the copy. The rollcage doesnt fit that good, the right way to do is to messure on an installed cage so you get it right from the beginning.
in other words, whats in it for me to give you the messures, and why do you want messures on something that doesnt fit well, as I mentioned in my last post?
Pictures?
The engine is in position, 12mm more to the left then original, the reason is that the drivetrain is now in the centre.
The driveshafts will have an angle of 4 degrees, the enigne is placed 65mm higher then original.
Uploaded with ImageShack.us[/img]
Uploaded with ImageShack.us
Uploaded with ImageShack.us
1994 Alfa Romeo 155 Q4: Dozeing in the garage.
2009 Audi A4 tdi: Everyday drive.1994 Alfa Romeo 155 , 1995cc Std Standard Black
All driveshafts are to be replaced anyway, the car will be 2000mm wide, original its 1670mm if I recall correct.
it's really hard to me to understand why you cut the half car.
anyway, I hope that you will fit an other type of suspension at the back, something like integrale's.
@ varypodaros. The car was full of rust, the handling on an original car is poor. We just wanted to do something new with an Alfa, it is not common in Sweden to do more then rims and exhaust.
standings at the moment, the rear end is almost done.
Bookmarks