Results 1 to 13 of 13
  1. #1
    Join Date
    Apr 2006
    Location
    Bournemouth UK
    Posts
    4,782
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Rides
    1

    Default Viscous Coupling article.

    Big thanks go out to EvoDelta who has provided us with a comprehensive article about the viscous coupling. Its based around an Integrale, but the same VC is in our Q4's.
    The article can be found here Vicous Coupling article

    Lots of info and loads of pics.

    Enjoy.

    Steve
    1994 Alfa Romeo 155 Q4: Dozeing in the garage.
    2009 Audi A4 tdi: Everyday drive.
    1994 Alfa Romeo 155 , 1995cc Std Standard Black

  2. #2
    Join Date
    Jun 2006
    Location
    Athens - Greece
    Posts
    1,008
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    thanks Steve {and Evodelta}. Compliments

    Nick

  3. #3
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,678
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    Not had a chance yet but look forward to reading it!

  4. #4
    Join Date
    Jun 2006
    Location
    Buenos Aires, ARGENTINA
    Posts
    464
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    Sorry to bring this back, but can the article be uploaded again?

  5. #5
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,678
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    .com seems to be dead again, here you go:
    http://www.berlinasportivo.org/Techn.../coupling1.php

  6. #6
    Join Date
    Jun 2006
    Location
    Buenos Aires, ARGENTINA
    Posts
    464
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    That's fast!!!!
    Thanks.

  7. #7
    Join Date
    May 2007
    Location
    Australia
    Posts
    963
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    would it be possible to alter the front / rear torque split of the VC unit by modifying the rotating blades inside the unit? To, like, 40/60 Front to rear.

    jim.

  8. #8
    Join Date
    Feb 2007
    Posts
    622
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    The VC doesn't control the ratio between front an rear, this is built into the centre diff.
    It controls how far the front or rear wheels slip (relative to one another) before locking.

  9. #9
    Join Date
    May 2007
    Location
    Australia
    Posts
    963
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    yep, I see that now So looking at the components involved you would have to make / modify quite a bit of stuff to change the front / rear drive split, which according to the Q4 manual is 47% front & 53% rear. Was there ever a Lancia Delta Integrale that had a different torque split, with more torque going to the rear wheels - such that one could fit those parts direct into a Q4 system?

    jim..
    Attached Images Attached Images

  10. #10
    Join Date
    Dec 2007
    Location
    Netherlands
    Posts
    309
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    The older deltas had it the other way around.
    So 53% front and 47% rear. Not much use.

    The 155GTA had more to the rear, and probably some race integrales. But i would be surprised those parts would fit easy, or would come cheap.
    155 Q4 wb 1995
    S2000 2005
    V70R 2005

    www.alfa155club.nl

  11. #11
    Join Date
    Feb 2007
    Posts
    622
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    Jan's pretty much covered it - expensive. There are companies which could provide the parts, Bacci Romano in Italy being one.

    But why?

  12. #12
    Join Date
    May 2007
    Location
    Australia
    Posts
    963
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    Well, I am sure that it would make little sense for most peoples Q4's however, I find that mine has too much front drive in slow 2nd gear corners which delays the ability to get back on the gas as quickly as possible. As long as you don't have to reduce speed to < 65 kph its pretty much ok, however in corners where more steering angle is required too much understeer is created when the amount of drive to the front wheels causes less grip to be available to keep the car turning. If front drive was reduced to 40%, then the system would produce faster lap times.

  13. #13
    Join Date
    Feb 2007
    Posts
    622
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    Maybe try changing your driving style and getting some lessons.
    I understeered out of one too many hairpins, threw the keys to a rally driver who jumped in and promptly slid through them sideways.
    That and a properly designed and set up suspension system which came afterwards. Just chucking on hard springs is never going to cure anything - quite the opposite, it will make things worse, the secret is in the damping.
    Last edited by Evodelta; 22-04-10 at 21:19.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •