Air ducts for turbo, intercooler and filter

[alfista_AR]

Hi guys,

I wonder if someone of you know, which could be the right aluminum diameter and thickness tube to replace all the rubber pipes used for the air flow.
I'm experiencing some wearing on air ducts and want to replace them all,from the air filter to turbo intake, turbo to inter cooler and from inter cooler to the straight metal tube that end in the throttle body.
do I need different diameters or can be used one for all ?

[AlfaJack]

Do you have any Samco dealers in BA? Or pipe specialist...you can give them your old pipes and they will match them in to the nice Samco type silicon stuff

[alfista_AR]

Hi Alfajack,
Unfortunately we don't have samco products or dealers in Argentina.
I'm thinking about get an aluminum pipe, cut and add silicone adapters from this guy
http://stores.ebay.com/ZENARacing
But the question is if I can use one size pipe only for all.

[pavs]

I've used zena racing and I can recommend them, I find you can get there stuff cheaper on ebay if you use there make offer option

[markgq4]

Hi Alfajack,
Unfortunately we don't have samco products or dealers in Argentina.
I'm thinking about get an aluminum pipe, cut and add silicone adapters from this guy
http://stores.ebay.com/ZENARacing
But the question is if I can use one size pipe only for all.

Hi, if its not too late already.
I did a bit of re-routing the inlet system and IIRC it was mostly 63mm inside diameter until you get to the plenum when it was much larger.