Results 1 to 15 of 15

Thread: Garrett GT35R

  1. #1
    Wolf66 Guest

    Default Garrett GT35R

    I finally got new turbo from USA. I had to wait more than 2 months.

    It is GT 35R ball bearing turbo with ported shroud (anti surge).

    Compressor AR 0.70, 56 trim, wheel dia. 61.4 mm
    Turbine AR 0.82, 84 trim, wheel dia. 68.0 mm












    Here it is compared with original Q4 turbo:












  2. #2
    MaxiBoost Guest

    Default

    :shock:
    is it a little big ?

  3. #3
    MaxiBoost Guest

    Default

    this is your turbo I think ?

    http://www.turbobygarrett.com/turbob...R_714568_3.htm
    711679-19

  4. #4
    Wolf66 Guest

    Default

    Quote Originally Posted by MaxiBoost
    :shock:
    is it a little big ?

    For running 2+ bar it can't be much smaller.

  5. #5
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    :shock: :shock: :shock: :shock: WoW! 8) 8) 8) 8)

  6. #6
    Stuntz Guest

    Default

    And then they will be wondering where all the roadside rabits have gone


    Will this be the strongest Q4 ? I think yes. Kepp on going Wolf

  7. #7
    Alan Guest

    Default

    Wolf all respect to your project, i'll come on a visit when it will be running

  8. #8
    axaQ42 Guest

    Default

    Hesus cristus this is the elephant among turbos.

  9. #9
    sub555 Guest

    Default

    looking at the size will it fit and will it have lots of lag if it does???

  10. #10
    Wolf66 Guest

    Default

    You can't fit it in original place. It requires a lot of modification.
    You also have to change the OEM radiator fan for a thinner one.

    This turbo is far more efficient than older turbos. It is also
    ballbearing turbo, which has less lag than normal one.
    It reaches full boost at around 4700 rpm, which is excellent
    for its size.

  11. #11
    Stuntz Guest

    Default

    Well it was designed for rally cars

  12. #12
    Juan AR155Q4 Guest

    Default

    Nice hair dryer!!!

    Is it water cooled?

  13. #13
    Wolf66 Guest

    Default

    Quote Originally Posted by Juan AR155Q4
    Nice hair dryer!!!

    Is it water cooled?
    Yes, it is water cooled.

  14. #14
    markgq4 Guest

    Default

    are you building the car for drag racing?
    or just street use?

    I spoke to a man with that same turbo (i think) on a delta integrale and he had 531hp at flywheel plus a 50hp shot of nitrous :shock:

    I didnt dare ask how much he had spent on it but it was a LOT !!

    Keep up the great work Wolf

  15. #15
    Wolf66 Guest

    Default

    I'm building the car for street use. With old turbo and 1.75 bar boost at 7500 rpm the acceleration time from 100-200 km/h was 7.8s,
    which means that car has 500+ hp. But the crucial factor is ignition advance. I run 15 degrees of ignition advance, which is quite high for such boost.

Similar Threads

  1. Garrett T3 specs
    By Alfadriver in forum Alfa Romeo Q4 Tech.
    Replies: 5
    Last Post: 08-08-06, 08:10

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •