Upgraded rear antiroll bar / swaybar

#84 · 28-05-07, 10:58

Have anyone here tried to fit the Whiteline rear anti roll bar on a Q4 with standard or similar exhaust system? See www.whiteline.com.au

They offer two different much thicker antiroll bars which would be just perfect for the chassi balance, but they are intended for the fwd versions. However, another Q4 owner here in Sweden fitted one on his Q4 race car with modified exhaust and it worked just fine. On my car with aftermarket exhaust system and standrad rear antiroll bar it is extremely tight between the components.

sub555 · 28-05-07, 11:59

didnt think that white line did one for the Q4??

peter holst · 29-05-07, 16:50

want to hear more

#84 · 29-05-07, 20:34

... me to

Well, if I don't get any input I have to order one, try to fit it and if I fail ... then I guess I've had a bad day. :x

stealthmannen · 26-06-07, 19:43

I mounted the rear antiroll bar from Eibach this evening. I bought the kit with front an rear bars. I managed to mount the rear easily but the front will never fit (tried last night). It will need a modification on the engine mounting at the differential....time for this will come during the winter :x

**Steve Webb** · 27-06-07, 07:43

Didn't know that Eibach did an ARB kit for the Q4, How uprated is the front bar? If you just want a small upgrade you can use the front ARB from a Dedra Integrale which is about 25% stiffer.

Steve

**Steve Webb** · 27-06-07, 18:27

Originally Posted by stealthmannen

I mounted the rear antiroll bar from Eibach this evening. I bought the kit with front an rear bars. I managed to mount the rear easily but the front will never fit (tried last night). It will need a modification on the engine mounting at the differential....time for this will come during the winter :x

Was the Eibach rear ARB specifically for the Q4 of is it for any 155?

peter holst · 27-06-07, 20:02

does anybody knows where I can get one from an dedra integrale?

**Steve Webb** · 28-06-07, 11:05

Originally Posted by peter holst

does anybody knows where I can get one from an dedra integrale?

You should just be able to order one from and Fiat/Alfa dealer, or maybe one of the 'grale specialists.

stealthmannen · 05-07-07, 19:52

Originally Posted by Steve Webb

Originally Posted by stealthmannen

I mounted the rear antiroll bar from Eibach this evening. I bought the kit with front an rear bars. I managed to mount the rear easily but the front will never fit (tried last night). It will need a modification on the engine mounting at the differential....time for this will come during the winter :x

Was the Eibach rear ARB specifically for the Q4 of is it for any 155?

It´s the same as the Twin Spark...