Results 1 to 12 of 12
  1. #1
    alfista_AR Guest

    Default 17 inch wheels, steering and more...

    Guys another topic on this!

    Sorry about my questions but I need help before "hurt" my machine !!!

    After install the 17" wheels (215/40/17 do you think that Jamex spacers or similar should be installed with this wheels?) I can't find the right setup and allignment of the car it continues to vibrate and the steering wheel pull to the right side.
    One guy told me that it could be a hydraulic steering problem, (something about a valve that is loosing pressure)
    did you hear something similar before?

    I'm going to do a major work on front suspensions (wishbones and shocks) and fix the steering issue during this process if needed.
    About wishbones do you recommend the Powerflex bushes?

    Thank you guys!
    Dario.

  2. #2
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    I have 17" wheels with these same size tyres and no problems.

    I think the problem could be the track rod ends or the wishbones (ball joint of the bushes) are worn, check them well with a crowbar and see if there is movement

  3. #3
    Brul(tm) Guest

    Default

    Quote Originally Posted by AlfaJack
    I have 17" wheels with these same size tyres and no problems.
    Same here, 17"wheels with an ET of 37.
    I also lowered the car 50mm.

    Greetings,
    Marc

  4. #4
    alfista_AR Guest

    Default 17 inch wheels, steering and more

    Thank you guys!

    What about spacers ? did you use one of what size 5 mm, 8 mm ? please let me know.

    About Powerflex bushes any tip or suggestion ?

    Dario.

  5. #5
    Brul(tm) Guest

    Default Re: 17 inch wheels, steering and more

    Quote Originally Posted by alfista_AR
    What about spacers ?
    I don't use them.

    About Powerflex bushes any tip or suggestion ?
    Can't say. I have a couple of wishbones waiting. But first the old ones have to give up.

    Greeting,
    Marc

  6. #6
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default Re: 17 inch wheels, steering and more

    Quote Originally Posted by alfista_AR
    Thank you guys!

    What about spacers ? did you use one of what size 5 mm, 8 mm ? please let me know.

    About Powerflex bushes any tip or suggestion ?

    Dario.
    Here is a good guide on how to fit them

    They are a bit expensive but the bushes will not wear out, but remember the ball joint will.

    http://www.daiblack.f2s.com/alfa155c...hes/bushes.htm

  7. #7
    q4fatboy Guest

    Default

    Hi Guys, I'm thinkling of getting a set of 17" Team Dynamics Pro Race 1.2 (4 stud version) like these

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...X:NEWLIST#LIST

    Anyone any comments on suitability, fit etc. What tyre size is best 215/40 ?

  8. #8
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    Quote Originally Posted by q4fatboy
    Hi Guys, I'm thinkling of getting a set of 17" Team Dynamics Pro Race 1.2 (4 stud version) like these

    http://cgi.ebay.co.uk/ws/eBayISAPI.d...X:NEWLIST#LIST

    Anyone any comments on suitability, fit etc. What tyre size is best 215/40 ?
    215/40/17 is what I run with no problems

  9. #9
    OpaNkaR Guest

    Default Re: 17 inch wheels, steering and more

    Here is a good guide on how to fit them

    They are a bit expensive but the bushes will not wear out, but remember the ball joint will.

    http://www.daiblack.f2s.com/alfa155c...hes/bushes.htm
    Is this part called ball joint?


    Can this ball joint also be replaced with polyurathane part?

  10. #10
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    Yes thats the ball joint, but I have never heard of it being upgraded to polly

  11. #11
    OpaNkaR Guest

    Default

    So theres no point in fitting powerflex bushes if the ball joint is worn out?
    Well, wishbones on my 155 have never been changed and im thinking of fitting powerflex bushes. Is it worth putting powerflex bushes on wishbones with probably worn out ball joints or should i buy some new wishbones with good ball joints and than fit powerflex bushes? As there is no PU replacement for the ball joint, can it be replaced with standard one without buying new wishbones?

  12. #12
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    Yes, If I wanted powerflex I would buy new wishbones and fit the new bushes to them and swap the bushes to new wishbones when the ball joint wears out - the ball joint takes quite a while to fail though

Similar Threads

  1. Wheels
    By q4fatboy in forum Alfa Romeo Q4 Tech.
    Replies: 51
    Last Post: 10-07-11, 23:36
  2. Steering rack
    By markgq4 in forum Alfa Romeo Q4 Tech.
    Replies: 15
    Last Post: 05-08-07, 23:07

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •