As i came to the power limit of standard engine, i installed new engine over the hollidays.
Specs:
CPS forged pistons comp. ratio 7.8:1
Colombo&Bariani street max cams
Gasflowed head
Custom made aluminium inlet manifold
Vernier pulleys
Spesso Group A headgasket
12mm head bolts
Lightened flywheel, balanced with crankshaft
Siemens DEKA 650cc injectors
Walbro highflow fuel pump
Tubular exhaust manifold
External wastegate
3" freeflow exhaust
3 bar MAP sensor
Front mounted intercooler
Max power 372 hp@5925 RPM, torque 44.2 kgm
Max power is at such low RPM, because ECU cuted the ignition at 1.2 bar boost. Real max power should be around 6400 RPM. I will dyno it again, when i'll write new chip for new 3 bar MAP sensor and 2 bar boost.
Bookmarks