Inlet mainfold rubber hoses

[#84]

Steve,

The cable is light grey, or white, with a red stripe. Picture 1. It goes together with the cable from the 2-pole contact with yellow sealing, seen in the forefront of the picture 2. They join in a woven rubber coated cable protector, circa 5 mm dia. See first thin green arrow in picture 3. They then join all the other sensor cables at the second thin green arrow in picture 3, to finally end up in the ribbed black plastic cable protector that runs below the coolant expansion tank with the blue plastic hose etc next to it, up along the right strut top mount. In picture three, the oil temp contact could be seen just on top of the big green X and the thick green line goes along the cable past all joints.

I hope that is of some help, otherwise we can sort it out live when I am in the workshop.