Results 1 to 12 of 12
  1. #1
    Join Date
    May 2009
    Location
    Melbourne
    Posts
    187
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default 166 vs Coupe Brembo Calipers

    I have come across some Alfa 166 calipers so I'm exploring a conversion on my Fiat Coupe 16V turbo which has the same brakes as the Q4.

    I have Coupe 20VT wheels which will of course clear 20VT calipers but will they clear the 166 Calipers?

    Is someone offering a bracket off the shelf? I read the thread down the page. It was kind of confusing exactly if they will work without any other mods. Also can the pad be made to contact the disc without the overhang shown in that thread? Can you use different pads?

  2. #2
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    I think the 166 calipers are thinner so can accomodate more wheels.

    There is a bracket for 155s to take the 166 caliper.
    For those like me who have Coupe calipers we just used the Coupe suspension upright.

  3. #3
    Join Date
    Apr 2006
    Location
    Bournemouth UK
    Posts
    4,782
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Rides
    1

    Default

    Aren't Coupe brembo capliers for 305mm disks and 166 calipers for 310mm disks?

    The problem with the overlap comes as the 166 disks are 5 stud (5x108mm) and so would need redrilling to fit on the 155 hubs.
    1994 Alfa Romeo 155 Q4: Dozeing in the garage.
    2009 Audi A4 tdi: Everyday drive.
    1994 Alfa Romeo 155 , 1995cc Std Standard Black

  4. #4
    Join Date
    May 2010
    Location
    Glasgow
    Posts
    54
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    I've got Coupe uprights on mine and brakes..... but the 166 calipers look a lot bigger. As I have some sitting sould I be able to bolt these on?

  5. #5
    Join Date
    Jun 2006
    Location
    London
    Posts
    2,677
    Mentioned
    9 Post(s)
    Tagged
    0 Thread(s)
    Rides
    1

    Default

    Quote Originally Posted by Ade View Post
    I've got Coupe uprights on mine and brakes..... but the 166 calipers look a lot bigger. As I have some sitting sould I be able to bolt these on?
    I don't think so - likely the holes are a different distance apart - I can't remember how far though..

  6. #6
    Join Date
    Mar 2012
    Location
    croatia
    Posts
    41
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    which discs you want to use with 166 calipers? you must put 166's 310mm discs because of the surface of brake pads. 305mm disc also won't fit

    166 calipers are bigger from coupes, and dics pads are wider.

    i'm not sure, but if you put 166 calipers and 310mm disc, i think you can't use 20vt wheels.

    hope i helped you a bit....

  7. #7
    Join Date
    Jan 2007
    Location
    Derbyshire, UK
    Posts
    3,082
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Rides
    0

    Default

    Quote Originally Posted by abarth 22 View Post
    which discs you want to use with 166 calipers? you must put 166's 310mm discs because of the surface of brake pads. 305mm disc also won't fit
    Not strictly correct...there are several of us running 305mm discs.

    wrinx
    My Q4 in the Garage

    www.alfaromeo155.co.uk ............................ □□□-V-□□□ .................................. www.ilmostro.co.uk

  8. #8
    Join Date
    Mar 2012
    Location
    croatia
    Posts
    41
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    Quote Originally Posted by wrinx View Post
    Not strictly correct...there are several of us running 305mm discs.

    wrinx
    sorry, i saw that in meantime...

  9. #9
    Join Date
    Apr 2006
    Location
    Bournemouth UK
    Posts
    4,782
    Mentioned
    2 Post(s)
    Tagged
    1 Thread(s)
    Rides
    1

    Default

    Does the fact that the pad overlaps the disk with the 166 caliper\coupe disk solution have any effect?
    I'm sure someone on here said that it would overheat the edge of the disk. Anyone any experience of that?
    1994 Alfa Romeo 155 Q4: Dozeing in the garage.
    2009 Audi A4 tdi: Everyday drive.
    1994 Alfa Romeo 155 , 1995cc Std Standard Black

  10. #10
    Join Date
    Feb 2012
    Location
    Cambridgeshire
    Posts
    106
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    I think there is a chance that the edges of the discs could overheat in extreme situations.

    The wear of the pad results in having a lip on the outer edge which in the extreme could also cause a problem (if the 2 lips should ever meet!!).

    Problem is easily solved though by champfering the top edge of each pad fairly dramatically before installing.

    The 166 calipers are taller, whilst the coupe brembos are fatter. I have a set of the brembos on my 24v V6, and the stopping power is quite incredible
    Drivers:
    - Red 155 Q4 Winny
    - Red 33 16v
    - Green 33 16v SW
    - Mrs Wombat Freelander

    Projects:
    - Various Alfa 33s

    Awaiting a grand re-awakening:
    - Red 75 3.0 Cloverleaf
    - The Wombat winter Freelander

  11. #11
    Join Date
    Feb 2012
    Location
    Hinckley, Leicestershire
    Posts
    237
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    I'm useing fiat coupe 20vt brembos as I can use coupe spacesaver if I get a punture. But have had to fit 10mm spacers so my tsw catalunya's clear the calipers the tsw's are et35.
    On my 155 20vt the tsw multispokes are et37 so I've got 5mm spacers on it
    Last edited by alfa155chris; 05-11-12 at 22:04.
    Alfa 155 Q4 skinny
    Alfa 155 2.0 8v skinny rolling shell being cut up to repair the Q4
    Alfa 155 black wb coupe 20vt engine STAYING NOW
    Alfa 155 White widey soon to be 20vt
    Alfa 155 2.5 v6 white skinny NEXT FOR SALE





    Will build alfa 155 or 145 into 20vt or 16vt or diesel's or selepeed's pm me

  12. #12
    Join Date
    May 2007
    Location
    Australia
    Posts
    963
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    The overlap issue has been well covered in many posts. It is quite simple to implement a setup with the 166 calipers and the 305mm fiat coupe disks with no overlap. It just takes careful measurement and bracket construction.

    The biggest problem with the whole 166/305 setup is that on a Q4 there is little room for brake cooling - especially with the large 'extra' bracket that you need to attach the 166 caliper. The position of the oil cooler, side engine mounts, the struts, uprights and drive shafts makes getting any brake ducting over 2" in there almost impossible.

    As the Q4 approaches 350 wheel hp the heat generated in the braking system configured like this for a track car means that breaking starts off very good, but fades to nothing after about 10 minutes.

    jim ~

Similar Threads

  1. 166 Brembo Calipers
    By Steve Webb in forum Alfa Romeo Q4 Tech.
    Replies: 56
    Last Post: 10-03-13, 16:27
  2. 166 Brembo caliper brackets.
    By Steve Webb in forum Alfa Romeo Q4 Tech.
    Replies: 37
    Last Post: 02-10-12, 09:32
  3. Brackets for Alfa 166 brembo 4-pot calipers on a 155 Q4 and V6
    By fochista in forum Individuals classified.
    Replies: 5
    Last Post: 22-09-12, 21:31
  4. Wheels for Q4 with 166 Brembo?
    By fochista in forum Alfa Romeo Q4 Tech.
    Replies: 9
    Last Post: 14-12-11, 09:04
  5. Brake pads for 166 calipers
    By jimnielsen in forum Alfa Romeo Q4 Tech.
    Replies: 9
    Last Post: 13-10-08, 10:39

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •