Binary file

[mpampis_]

Hello guys, I would like to make a question about the "famous" evocars chip. I read many articles specially in fccuk forum that there were some fake binarys. Does anyone have the original binary file of evocars? Just to compare it with our maps specially the advance map that I heard that is advanced a lot. Thank you guys. Something that I would like to suggest is for making a task like ecu page and post some binaries of ours that is working well and of course the car's setup like CR, fuel type etc. I think this will help a lot of us

[Suzumushi]

Hello guys, I would like to make a question about the "famous" evocars chip. I read many articles specially in fccuk forum that there were some fake binarys. Does anyone have the original binary file of evocars? Just to compare it with our maps specially the advance map that I heard that is advanced a lot. Thank you guys. Something that I would like to suggest is for making a task like ecu page and post some binaries of ours that is working well and of course the car's setup like CR, fuel type etc. I think this will help a lot of us

Hello, don't know answer for Your question but i like Your idea, as my car is currently in ecu specialists and they are making for me dual map setup.
One of they thoughts was that original maps are "crappy" in terms of advance map especially.

Page with maps will be really nice, and only these that are not copyrighted

regards

[mpampis_]

Posting ecu binaries is for educational purpose only. Every car than completely stock is different. Different CR, gas's octane, intercoolers, afr etc. I just thought it was good idea to see what anyone has done and what are the results

[Steve Webb]

It might be a good idea to create a form where people can fill in what mods they have made to the car along with the chip used. That way it would be easier to compare different cars.

[mpampis_]

Do it Steve, I will post then some nice stuff. As I asked above, does anyone has this evocars chip to compare with?

[Steve Webb]

I've been having a play with the form this evening, what sort of details do you think would be good to collect?

As for the Evocars chip, I've got one in my car, sorry don't have an electronic copy of the chip.
Actually I think it was my car that the chip was developed on, if I remember correctly, the chip is a hybrid of the Grale chip with Q4 data. It was written for the car then fine tuned on a rolling road.

[Steve Webb]

Just out of interest as well, what are you guys using to read/write the Eproms?

[mpampis_]

Just out of interest as well, what are you guys using to read/write the Eproms?

I have a friend of mine that has a programmer and I use it too. I don't know the brand but in www.moates.net there is a small cheap one that I guess is doing it's job great

[Steve Webb]

I have a friend of mine that has a programmer and I use it too. I don't know the brand but in www.moates.net there is a small cheap one that I guess is doing it's job great

Cheers for that link, anyone got any experience of the cheap ones from eBay? They look too cheap to be any good, but you never know.

[mpampis_]

Cheers for that link, anyone got any experience of the cheap ones from eBay? They look too cheap to be any good, but you never know.

It is cheap in case of others, no so cheap in reality. This is the direct link
http://www.moates.net/burn2-chip-programmer-p-197.html

[Steve Webb]

This is the list of things that could go into the form for people to fill in. Not comprehensive or in any particular order.

Air Filter
Inlet path
Inlet manifold/Plenum
Intercooler
Exhaust Mainfold
Turbo
Exhaust system
Crank
Con-Rods
Pistons
Camshafts
Head
Base boost pressure
Base Fuel pressure
Compression ratio
Fuel used
ECU Chip

I'm currently playing around with Adobe to get a form that allows you to choose between standard and modified for each item, then the oppotunity to add the modification as text.

These forms could then be attached to a post in the users garage section.

[alfista_AR]

It is cheap in case of others, no so cheap in reality. This is the direct link
http://www.moates.net/burn2-chip-programmer-p-197.html

I bought this one from E-bay.
It's largely more complete than any other models, I intended to use it for other purposes besides ECU programing.

http://www.ebay.com/itm/PCB5-0E-Univ...item5ae1b7a442

-Dario

[mpampis_]

I understood! Well the most important details for the form is compression ratio, type of Intercooler, map sensor (2.5 or 3 bar) and boost pressure. If anyone think that something else is nesseray he can tell us an opinion

[AlfaJack]

Octane rating?

[jimnielsen]

Steve, I have a copy of the EVOCARS chip that I can email..

[Steve Webb]

Steve, I have a copy of the EVOCARS chip that I can email..

Cheers Jim that would be great.

[balage]

Hi Jim!
I am Balazs from Hungary, I've got a Q4. Could you please send the Evocars chip copy for me?

thanks

[corriedw]

Steve, I have a copy of the EVOCARS chip that I can email..

I would appreciate if I can get it too

[fa175]

Does any one has good Bin file for lancia delta hpe ?
My engine has Forged Pistons with cr ~8,5 ,and ijectors 650cc i wana start with e85 fuel , i think my boost must be about 1,4 bar .meybe any one did this ?

[Evodelta]

Does any one has good Bin file for lancia delta hpe ?
My engine has Forged Pistons with cr ~8,5 ,and ijectors 650cc i wana start with e85 fuel , i think my boost must be about 1,4 bar .meybe any one did this ?

Why not fit a mappable ECU? Safe and easy....

[Suzumushi]

Why not fit a mappable ECU? Safe and easy....

Can confirm that this is in my opinion best way, no more burning eeproms, and opening ecu etc....
fast and easy mapping.

regards
W

[fa175]

Why not fit a mappable ECU? Safe and easy....

So yes i have and piggyback but more easy is just change eprom and go. Mapping is good,but if i have some engine changes i must go again map it's not cheap.

[mpampis_]

Jim, would it be possible to send it to me too please?

[mpampis_]

that will be a great job Steve

[Steve Webb]

Oh how about this for the form, 1st draft so any criticism welcome.

The idea is that people can fill this form in, then add it to a post in their personal garage thread.