Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2007
    Location
    Romania
    Posts
    665
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default Engine compression

    As I know a 155 Q4 engine compression should be at 8:1, isn't it?

    Before starting the rebuilding project I have done also a compression test to my Q4's engine and I must say I'm a bit worried (11.2/ 10.7/ 11/ 11.1 if I'm correct). Please look the picture above.

    Am I right to be worried? At least there are no big differences between cylinders...

    What would be the most dangerous consequences of a higher engine compression considering to a OEM engine with no upgrades? Thanks a lot guys.

    Cheers,
    Cristian.
    Attached Images Attached Images
    Alfa Romeo 155 Q4 WB '95
    Alfa Romeo per sempre !

  2. #2
    Join Date
    Mar 2008
    Posts
    300
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    The nominal compression ratio (8:1) is not the same as the measured.
    The measured end-compression is in bars.
    You don't have to worry, it's not too high.

  3. #3
    Join Date
    Jun 2006
    Location
    istanbul
    Posts
    132
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    @Xti ,
    Q4 compression ratio is 8:1 (RATIO)

    your test not ratio ,
    your test is compression value in cylinder ,
    test value 10-12 bar is good for q4

  4. #4
    Join Date
    Jun 2007
    Location
    Romania
    Posts
    665
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    It seems like I've mixed terms, thank you both.
    I have calmed down a bit now.

    I thought that the engine cuts after 4000rpm occured due to "a higher compression"...

    Need to read more but I'm willing to learn.
    Alfa Romeo 155 Q4 WB '95
    Alfa Romeo per sempre !

  5. #5
    Join Date
    Jun 2006
    Location
    Buenos Aires, ARGENTINA
    Posts
    464
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    Quote Originally Posted by Xti View Post
    I thought that the engine cuts after 4000rpm occured due to "a higher compression"...
    Check phase sensor, cause if disconnected or out of range, it takes the ecu to safe mode cutting @4000

  6. #6
    Join Date
    Jun 2007
    Location
    Romania
    Posts
    665
    Mentioned
    1 Post(s)
    Tagged
    0 Thread(s)
    Rides
    0

    Default

    Quote Originally Posted by Juan AR155Q4 View Post
    Check phase sensor, cause if disconnected or out of range, it takes the ecu to safe mode cutting @4000
    It's good to know so I'll keep that in mind when reassembling, thank you Juan.

    Everyday I realize how much I can find from this special forum, from nice and cool guys experiences. Sharing is always very much appreciated.

    Cheers,
    Cristian.
    Alfa Romeo 155 Q4 WB '95
    Alfa Romeo per sempre !

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •