Unidiag on a Q4

[na15575]

What is your opinion for?
1. make a new thread for Barnacle Widgets to see if there is interest from the people in this forum for that Widgets
2. contact with Barnacle to ask him to make it for as

[wrinx]

I'm interested...but the timing might be bad for me! I've just ordered a set of cables for Unidiag and now need a laptop for the garage!

But it's worth polling for wider interest...

wrinx

[Q4Jan]

I would be interested, but we first should check if he would make them.

[na15575]

I would be interested, but we first should check if he would make them.

I have already made a payment to Neil barnacle
And I order one of the mkII the delivery must be last weak of January
Because he is on holiday
the cost is 120? or 132? with out a mounting plate like coupe
so he is sure that Q4 is supported if you want you can do an order via fccuk but you have to be registered
http://www.fccuk.org/forum/ubbthread...717230&fpart=1
or you can email him
I tell him to change the logo but he want risk it
It is a series change on the code

Here is the page from fccuk for those that they are not regist

The latest Mk IV Barnacle Widget is now available for sale. It features the same functionality as previous versions - see the FAQhere - and offers USB connection to a laptop and an improved display screen resolution. It works on 16v NA (not 1.8 versions), 16vT, 20v NA (not VIS engines), and 20vT.

It's fitted to a carbon fibre mounting plate to replace the right-hand side air vent - see here , look towards the bottom of the page - for pictures. If you have a left-hand drive vehicle, the plate is easily modified for the slightly differently shaped cut-out in the fascia.

There are three choices of display colour: - note that on all these, the image will be black(ish) on the LED colour and in daylight they'll all look pretty much black and white because of reflected daylight. In the dark, they'll show the LED colour.

1) Blue/Black: http://img-europe.electrocomponents....5327079-99.jpg

2) Green/Black: http://img-europe.electrocomponents....5327085-99.jpg

3) White/Black: http://img-europe.electrocomponents....5327063-99.jpg

At the moment I can't supply nice boxes for external mounting but if you want to provide your own case I'm happy to provide the unit without the fascia plate at a slight discount.

The price is UKP ?130, including postage to the UK or Europe; for further afield, postage is negotiable. Supplied without a mounting plate, UKP ?120. I can take either a personal sterling cheque (PM me for the name and address), or (preferable) paypal to nailed_barnacle@hotmail.com

If you want one, please indicate below or PM me. I need:
- your name (so I can write it on the envelope) and address
- your engine type (so I can set it correctly before sending it)
- your choice of display (see the FAQ; if you don't specify, you'll get the default choice of revs, air pressure/flow, air and water temperature)
- left or right hand drive (so I can supply a longer cable for left hand drive - default is for right hand drive)
- your choice of display colour (recommended and default is green as it has the highest contrast ratio)
- the money...

The widgets will be built, programmed, tested, and despatched in order of payment received. They're guaranteed to the original purchaser for a year but you'll need to sort out the postage both ways.

Timing: the circuit boards are being etched in Bulgaria and won't be ready for about a fortnight. I haven't yet ordered the mounting plates yet. So I expect nothing to be ready before the new year - particularly since I will be working overseas at least one week and will be on holiday second weekish January.

Legal bit: this offer is from me, Neil Barnes, and the FCCUK does not in any way endorse the widget. The FCCUK has kindly permitted me to use their logo as the initialisation display. You install this device at your own risk - in particular, pay attention to the need for a fused supply to protect your car and its wiring in the case of a fault - and I accept no responsibility for any consequential loss, however caused, other than the replacement cost of the widget.

Neil


Edited by barnacle (29/11/2008 11:46)

[wrinx]

Mmm, bit put off by having a Fiat Coupe splash screen on start up

Nothing wrong with Fiat you understand, just not right in a Q4

Let us know how you go on

wrinx

[na15575]

yes not right for a Q4
only for 10sec on start up
but never mint
will fix it later sometime
i will let you know how im going

nikos

[Q4Jan]

"MK5 is a development version which is not yet in the wild. It's hardware identical to the MK4 but it offers improved error reporting to a terminal program (text messages rather than the string of numbers delivered by earlier versions) and will talk to a wider range of Fiat/Lancia/Alpha engines, at the cost of the pretty coupe club logo on initialisation.
"
I think i wait for this as i have no problem sacrificing the coupe.

[Q4Jan]

Just got back email from Neil.
The Mk5 will be some time, but if it ever arrives it should be possible to upgrade.

But as he has no idea when this should arrive i ordered a Mk4.

[wrinx]

Decided to go ahead with the Unidiag anyway....leads arrived today Laptop bought at Christmas....time to play!

No good for the Q4 but still ok for two of the other cars here

wrinx

[Q4Jan]

Decided to go ahead with the Unidiag anyway....leads arrived today Laptop bought at Christmas....time to play!

No good for the Q4 but still ok for two of the other cars here

wrinx

Waiting for the matta readouts than..

[wrinx]

You may be waiting some time...

wrinx

[WhizzMan]

I'm sure we can bolt something to the matta that will have shiny leds and talks to the unidiag equipment. Having it connected to the engine is another matter

[wrinx]

I'm sure we can bolt something to the matta that will have shiny leds and talks to the unidiag equipment.

Sounds like fun...me like shiny things!

Having it connected to the engine is another matter

...so long as the lights flash and look pretty I'm happy

wrinx

[Xti]

I've read this thread today but as I'm not very familiar with electronics should I understand that so far a diagnose on 155 Q4 can't be made? Sorry and thanks.

Cheers,
Cristian

[wrinx]

Yes, someone recently bought and tried a Barnacle (sorry, I forget who) and it doesn't work

I have "Unidiag" and that doesn't work on Q4s, neither does Alfadiag.

Perhaps the only option is Alfa's Examiner???

I think it's because Q4s are a mix of all the Fiat group cars, and not just one

wrinx

[Q4Jan]

I got a widget. Plus another member here.
Sofar it does *NOT* work. I will only try to switch the K&L lines to check, but not much hope that it will work.

Seems the Q4 is a bit different from a coupe.....

Neil is a nice chap and offerd a refund without me even putting the pressure on.

No really, very nice guy to talk to.

[arjunior45]

guys, if you want just to check for errors why don't you replace the oem eprom with the one from FIAT Coupe {19403/19404 for 10103/10104 eproms and the one from FIAT Coupe 16VT with IMMO for the 10105 IMMO} and check for errors. Engine starts and you can drive the car like with the oem eprom. Trust me. Evocars chip for 155 Q4 is just a modified FIAT Coupe 16VT chip, if this can assure you. I also use the Coupe eprom for more than 2 months without any problem. The only thing that you can not test with Coupe eprom is the CO trimmer that it is not used on coupes.

After testing you can just switch back to your chip.

Nick