on my coupe ( fiat ) I?m gonna use different cooler ...
Type: Posts; User: Jarkko; Keyword(s):
on my coupe ( fiat ) I?m gonna use different cooler ...
Sami is not a member here, I think.
I had the same kind of intercooler also in my Q4. the intercooler is made here :
www.amworks.com
it was custom build and costs a lot ( around 400e )
I measured...
www.scara73.it
that works a little better
ok, I have been asking for several tuners about this, and YES I can use those like I said.
thema/coupe cams or tipo cams.
I will have those both soon, so have to test those.
ups, I mean to say, that now I have FWd car ..
fiat coupe 16vt.
used to have alfa 155q4 with standard clutch and that power.
I had standard clutch 2 years... no problems..at all
only 430nm of torque, and full boost around 4200rpm.. but now with smaller "turbo"
58mm compressor ; )
only...
and fwd car.. :(
3" exhaust,...
we have one guy here in Finland, who is ... well good with cars.
he have said :
when wanting something extra, go for thema/coupe NA cams...
if you want more power, then tipo cams, or some street...
hmm maybe my English is bad..
I mean, that using other cams, and make them as C & B ones ...
and my goal is of course, that good usefull power .
I havent heard, that its so on/off, when using...
engine mapping for me is 100e thats not too much.
well with thema NA cams we have here 425hp / 1.25bar car..
best results what I have seen with standard cams is 340hp / 1.4bar .
a little...
but usually NA model cams are good for turbocars ( at least much better, than standard )
and, 80 century... well our cars engine is from there...
I know, that special cams is best option ( we have...
I have known about the tipo inlet and original inlet to exhaust modification.
but here ( Finland ) one guy at least just put those both tipo cams in and said :
it has lost from the bottom, but has...
well I have both tipo cams, why wouldnt those work ?
inlet cam --> inlet and exhaust to exhaust ?
of course need to do that little "mark" on the exhaust cam.
I mean it works on tipo NA
why not...
just wondering, and what I?ve been told , its just that:
for example, when chancing the belt, just take cams off and put new cams in, with turbo model pulleys and put timing marks on the right...
the standard exhaust is shit ! and I have dynopaper from that.
with same chip however I made that +260hp with same fuel pressure..
and 30hp just replacing the exhaust to 3" . that really tells...
with standard exhaust, you cant get 260hp.
with chip, intake, bigger intercooler, I got 225hp / 356nm ( 1.35bar --then drop under 1bar 4700rpm )
my friend make just an 3" exhaust 0.7bar 220hp /...
well, with both manifolds its should be at high revs, when you get some power more..
some guy was tested grale manifold on 16vt coupe and got almost 15hp more.
its not a blug and play jobe, but...