Q4 EPROM Addresses

If you real want to program you car you need imao a Ostrich or product like that.
I have one, and it is 1000 times more easy to be able to make the change on the fly without burn a new chip every time..

Maybee it is kind of overkill if everyone buy one, so maybe some of you could share one with eachother..

have you got any links for this?

i have this one
http://www.moates.net/product_info.p...roducts_id=169

i would like Q4 xdf too please. i have 1996 widebody. my email is mpampisxak@hotmail.com thank you very much

The ECU page is now back up and running so all the files should be back. If anyone has any other files please mail them to me and I will add them to the page.

Steve

thanks, so, for 101.05 IMMO is it the same .xdf file? i don't think so, because i have the same prices to all fields ex. injection, all rpm is 28, the throttle is 63.50 and all rows and columns are 17,32, so i guess 101.05 IMMO must have another *.xdf file. Please someone respond!

Hi, this thread had come to my attension again as I have just had an email stating that some of the xdf files are corrupt.

Can anyone verify this, and more importantly let me have updated xdf files that aren't corrupted.

Hi steve,

i wrote you that email. Look what i get from .xdf and .bin on http://www.berlinasportivo.com/pages/q4ecu.php

[IMG]http://s14.postimage.org/4z8otjj2l/corrupt_xdf.jpg[/IMG]

On graphs it looks like this:

http://s17.postimage.org/tetrx2oa3/c..._xdf_graph.jpg

This is right all correct except rpm brake points in advance, enrichment and boost table. The values in all tables and map brake points are correct. You need a simple modify of the xdf. Tell me which version of xdf you have and I will correct it

Thanks for quick feedback. As i wrote you in PM, its 101.03 version from year 1992. Thank you! I appriciate it much!

Quote:

---

Originally Posted by Lukajda

Thanks for quick feedback. As i wrote you in PM, its 101.03 version from year 1992. Thank you! I appriciate it much!

---

please share updated version to everyone.

regards

Ok, I will sent to Steve all xdf corrected

Send them through to the usual address and I'll get them up on the site.

Are the files on the site corrupted then? Worth taking them down?

I think that happened to me too some time ago between tunerpro versions 4 and 5.

I had to do some manual adustments of the .xdf files, don't remember what , so you could first test and older tunerpro to make sure

101.03 and 101.04 bin files, share the same xdf file.

Thanks for the new updated files _mpampis, I've uploaded them to the website now and have updated the page.

All the new files can be found here : ECU Page

Cheers all.

hello to all I wanted to introduce myself to this forum my name is Franco are Italian , are owner of a 155 q4 1993 red , are very happy that there is this forum sport sedan , unfortunately in Italy there are not these forums that talk of our 155 q4 , wanted thank the authors of all this , I wanted to know if anyone can help me figure out how to convert my bin 101.03 file,in xdf file because the files posted on the site ifile xdf are not complete , for example, do not the function to disable the sensor detonation , thank you all , sorry if I may have written in the right place .

sorry for my English , I know little English language

4 years I live in moscow , but I'm Italian,Working in a fiat alfa service , they are mechanical .

Why you'd want to disconnect knock sensor?

Hi to all
I'm trying to understand some issues mapping with tunerpro the P8 4WF ecu of Fiat Coupe, and maybe your feedback with the Q4 ecu could help.

With the xdf of your site, I obtain for 155 Q4 turbo duty cycle the following table.
Is that correct? Especially those 100.0 values at low rpms...

When you are on the road, does the yellow box that indicates the exact point where the ecu is reading works good in this table?

Thank you!

http://s33.postimg.org/mfw3dcklr/155_map.jpg

I think they are 100.0 because you need full boost at low rpm, that's why you want your WG closed.
155 q4 has an overboost at low rpm, 1.1 bar (0.8 bar w/o overboost).

As for the yellow dot, no idea. I assume you're using Ostrich with live mapping, but never done that.

Hello everyone, and for a long time I try to understand how to convert a bin file in xdf, but no one has ever helped me, a long time ago I asked a question on the site in hand, please, I would like to know how, thanks