Yes I need just good quality pictures of Q4 oil pump
have any one ?
Printable View
Yes I need just good quality pictures of Q4 oil pump
have any one ?
Showing what parts?
Will make some pictures when I found it in my garage.
Spoken like a true Q4 owner. The oil pump is in the garage, not on the car. :clap:Quote:
Originally Posted by Brul(tm)
Forgot that I took my engine apart ;)Quote:
Originally Posted by Steve Webb
Here some pictures.
http://i115.photobucket.com/albums/n...umptopview.jpg
http://i115.photobucket.com/albums/n...ersideview.jpg
http://i115.photobucket.com/albums/n...psideview2.jpg
http://i115.photobucket.com/albums/n...psideview1.jpg
http://i115.photobucket.com/albums/n...bottomview.jpg
I am not ready yet to take it further apart for inspection and refurbishment (if possible).
Thanks brul ..
ok
what is the my problem?
I have oil pump
brand name is : schadek , brazil made
http://www.schadek.com.br/EN/Web/Home/Default.aspx
code part number is : 10.124 (8valve)
its shown fiat 2000cc 8V engine
16V engine part code is : 10.125
what is the difference ?
is it pressure ?
or what ?
picture are like same on the site ..
and I found turbo models picture is totally different (10.118)
8 VALVE (I HAVE) 10.124
http://img825.imageshack.us/img825/6359/101248v.jpg
16VALVE 10.125
http://img571.imageshack.us/img571/8808/1012516v.jpg
and turbo.. but write catalog tempra 2.0 16v turbo !.. 10.118 part number
http://img546.imageshack.us/img546/9...18turbo16v.jpg
and this is the real original 155 Q4 oil pump picture
http://img36.imageshack.us/img36/4192/98394435.jpg
and another question about oil pressure
how much "bar" see on the oil pressure gauge ?
when engine is HOT and running IDLE
tell me with oil specs please (10w40 ? 10w-60 ?)
Well, it's a while ago.
When it was running, I saw almost 8 BAR on the gauge with 10W40 and a cold engine.
A hot engine gave me just above 2 BAR. Whilst normal driving, the gauge would go up guickly to stop round the 7 BAR.
Presure sensor is new, not sure if the gauge gives the correct reading.
The garage where the car was in service has done something to increase the oil presure.
http://img718.imageshack.us/img718/5...0918172918.jpg
http://img263.imageshack.us/img263/1...0918172900.jpg
and diffrence look this than original
http://img14.imageshack.us/img14/458/difflo.jpg
I know Bielstein in Germany also sells different oil pumps for the Delta Integrale and 155 Q4. Housing slightly different, but good fit and same operation. No modifications required.
If you can get a hold on a OEM oil pump it's going to cost a fortune :eek:
not realy.. i saw OEM oil pump on ebay for about 170euros with shippment...
some fiat mechanic tell me 16V and 8V oil pumps are same
but why factory make two different model ?
I've never pulled down 2 pumps side by side but I would have a guess there are some internal differences even if they are identical on the outside. Probably the gears used for flow volume. I know this is the case in the old Fiat SOHC motors. The Uno turbo pumps have different gears to the non turbos.
The only difference is the pressure those pumps are producing. I was told there is a spring and can change the oil pressure by changing the tension on this spring (of course didn't try any gambling and used the original one.) . Those Schadek branded oil pumps are very common in Turkey. They were produced for Fiat 8v engines and seems exactly same with Q4's genuine oil pumps externally and because of lower pressure they produce many Q4's do suffer engine detonations caused by low oil pressure in Turkey.
Official figures are that it should be showing 1 bar at 100'c with standard factory recommended grade of oil (which I think is 10/40) at idle.Quote:
Originally Posted by MaxiBoost
Hi!Quote:
Originally Posted by Evodelta
Thats what I see on the oil pressure gauge of my Q4. And it goes up to about 4,5 bar (warm engine) and about 6 bar at cold engine.
Saltuti, fochista.