PDA

View Full Version : Oil pressure & temp sensors



AJ
26-11-07, 12:29
On the oil housing there are 3 sensors, which ones are the oil pressure & oil temp?

What is the 3rd one for?

Evodelta
26-11-07, 15:08
Low level warning light - I'm not 100% sure though.

AlfaJack
26-11-07, 15:44
Guessing, 6 could be oil temp 7 is the oil pressure sender, 8 is the low oil pressure light sender and 6 in the second pic might be the low oil sensor.

http://www.cloverleaf4.co.uk/images/uploads/7389.png
http://www.cloverleaf4.co.uk/images/uploads/7390.png

I will confirm later though unless someone can do it for me ;)

AJ
26-11-07, 15:50
I found it in the pdf. The lowest sensor is the dash low level light, the sensor with the plastic round thing (no. 7 in the pic above) is the pressure sensor, and the one above that mounts vertically is temp.

I've got an SPA oil temp & pressure gauge, but the thread diameters are wrong, so need to get some adapter made up.

AlfaJack
26-11-07, 15:54
I found it in the pdf. The lowest sensor is the dash low level light, the sensor with the plastic round thing (no. 7 in the pic above) is the pressure sensor, and the one above that mounts vertically is temp.

I've got an SPA oil temp & pressure gauge, but the thread diameters are wrong, so need to get some adapter made up.

Good guessing then:tongue2:

You got the dual display type? Very smart they are!

AJ
26-11-07, 20:24
Yeah dual oil temp/pressure, smart looking gauge - just want to get the sensors plumbed in now!

AlfaJack
26-11-07, 20:44
You may have other sources but this place is good for adaptors:

http://www.merlinmotorsport.co.uk/advanced_search_result.php?keywords=adaptor

AJ
26-11-07, 21:01
Good find there Jack, thanks - now I just need to work out what threads the oem sensors are..

AlfaJack
26-11-07, 21:49
Im going to place my guess at M13 x 1.5

Juan AR155Q4
27-11-07, 19:23
Im going to place my guess at M13 x 1.5

I?d go for a tapered thread,I think is 1/8"NPT or 1/8"BSPT.

AJ
28-11-07, 14:57
I would have thought tapered as well... but they both bolt up tight with a sealing washer, not tapered as per the sump plug. I haven't got any thread gauges for bspt or npt, I'll be able to measure the taper as well if it is.

AJ
02-12-07, 20:02
For future reference, both oil temp and oil pressure sensors are M14 fine (1.5mm pitch) - close guess Jack!

AlfaJack
02-12-07, 21:12
heh heh, the water temp sendor is M16 x 1.5 so i had an idea.

AJ
03-12-07, 13:39
Here's a challenge - can anyone find an adapter M14X1.5 (Male) - 1/8BSP (Female) ?!