PDA

View Full Version : 2nd Gen Lancia Delta



Steve Webb
20-08-07, 18:20
This one

http://www.lanciadeltaonline.com/Vostre2/fabrysviz/Fabrizio%20Basilea%20Svizzera%20Lancia%20HPE%2099% 20turbo%2016v%20nr2.JPG

Did i read correctly that it uses a fiat tipo floorpan?

If so wouldn't it mean that you could transplant the 2.0l 16v Turbo engine into the 155 (or even a tipo :eek::eek:), pretty much using off the shelf parts.
Tune the engine and you have got a 250bhp+ fwd street sleeper!!

AlfaJack
20-08-07, 18:27
Says it in the Wiki too!
http://en.wikipedia.org/wiki/Lancia_Delta#Second_generation

Well we know the engine goes, but with what gearbox? Is the 2nd Gen Lancia Delta's g/box shared with the Fiat Coupe 16vT maybe??

veki
21-08-07, 00:57
Also the 145/146 (TS, not the boxer), and I assume that the GTV would accept the engine without major problems. Lancia Delta 2, Thema, and Fiat Coupe use 2.0 16v T with fwd, so the gearbox can be taken from one of those.

Here is a Croatian 145 Integrale, but it could have been fwd just as easy:
http://www.quartermile.ws/forum/viewthread.php?tid=4231

On the same page there arew a few turbo Tipos:
http://www.quartermile.ws/forum/viewthread.php?tid=3838
http://www.quartermile.ws/forum/viewthread.php?tid=4033

and so on....

Steve Webb
21-08-07, 07:17
Cheers for those links Veki, I kmew someone somewhere would have done this. The 145 Integrale looks like a big job.

veki
21-08-07, 10:03
Well, not really that big.........apart from the tuning, all you really need to do is make some holes for the rear diff, the fuel tank gets in the way, spare wheel, and a few other minor things.

Stuntz
21-08-07, 14:05
All you need is engine and gearbox ! fits bolt to bolt To alfa 145 TS models fita tipos minor changes needed .

Evodelta
01-01-08, 11:34
The full Dedra integrale system fits into a Punto too, the Puntograle or 'Grama 2' as it was officially named was built as a one-off by Maggiora Coachbuilders who built the quality stuff for Lancia (Evo 2s, Kappas, Nuovo Delta HPEs (pictured above) etc), it's got the body of a Punto (no shit) over the chassis and engine of a Dedra integrale, It's bronze in colour and there are some pics of it floating around on the internet.

I have heard of 3 Fiat Coupes running around with the Q4/integrale 4wd system in them, one is in the UK and uses an 8v engine:

http://i5.photobucket.com/albums/y177/jayfreeride/DSC05374.jpg
http://i5.photobucket.com/albums/y177/jayfreeride/DSC05367.jpg
http://i5.photobucket.com/albums/y177/jayfreeride/DSC05375.jpg
http://i5.photobucket.com/albums/y177/jayfreeride/DSC05399.jpg
http://i5.photobucket.com/albums/y177/jayfreeride/DSC04544.jpg
http://i5.photobucket.com/albums/y177/jayfreeride/DSC04541.jpg
http://i5.photobucket.com/albums/y177/jayfreeride/DSC04562.jpg
http://i5.photobucket.com/albums/y177/jayfreeride/DSC04563.jpg

There is one in Greece which has a 20VT engine and this one in Denmark:

http://www.motorsportnord.dk/dennis.html

http://www.motorsporten.dk/news.asp?aID=22551

http://www.bilgalleri.dk/html/vid_vis.asp?VideoID=7074

AlfaJack
01-01-08, 12:33
http://i5.photobucket.com/albums/y177/jayfreeride/DSC04541.jpg


Nice tank!!!:cool::cool::cool:

markgq4
06-01-08, 13:31
http://www.bilgalleri.dk/html/vid_vis.asp?VideoID=7074[/QUOTE]


Bloody hell!! thats a bit quick !

SteveNZ
09-03-10, 14:24
A friend of mine picked one of these up in NZ. Its probably the only one in the country. It has been sitting for years broken and neglected but it can be registered for road use so its quite a find!

http://i697.photobucket.com/albums/vv337/Lsinky/DSCF0032.jpg

SteveNZ
20-05-10, 15:33
Full story here!

http://www.fiatcarclub.co.nz/forum/viewtopic.php?f=13&t=292

mindus
20-05-10, 18:20
Q4 system (front and rear suspensions, driveshaft, engine with gearbox) perfectly fits into 2nd gen Delta HPE (or Nuovo Delta as some call it). A bolt on solution, only you have to do two holes for the middle bearing of the driveshaft. And yes, figure out where to put a tank :)

It should be the same with Fiat Coupe, since it uses the same floorpan.

Also, Dedra front and rear subframes are the same as Q4. Completely interchangeable...

Visa versa should not be a problem (2wd turbo engine from Delta to 155).

If anyone wants to buy one, I can send contacts of a person, who might sell his Delta HPE converted into 4WD in a good condition :D
Cheers

SteveNZ
21-05-10, 13:50
Q4 system (front and rear suspensions, driveshaft, engine with gearbox) perfectly fits into 2nd gen Delta HPE (or Nuovo Delta as some call it). A bolt on solution, only you have to do two holes for the middle bearing of the driveshaft. And yes, figure out where to put a tank :)

It should be the same with Fiat Coupe, since it uses the same floorpan.

Also, Dedra front and rear subframes are the same as Q4. Completely interchangeable...

Visa versa should not be a problem (2wd turbo engine from Delta to 155).

If anyone wants to buy one, I can send contacts of a person, who might sell his Delta HPE converted into 4WD in a good condition :D
Cheers

I'm guessing your friend does not live in Australia. :frown:

mindus
21-05-10, 21:02
Nope :) Although I'd love to spend some time in Australia myself...


I'm guessing your friend does not live in Australia. :frown: