PDA

View Full Version : Anyone looking for a clutch?



Steve Webb
06-06-06, 21:15
OMP Group N clutch here

http://cgi.ebay.co.uk/OMP-Racing-228mm-RigidClutch-Plate-ALFA-FIAT-LANCIA_W0QQitemZ4647269342QQcategoryZ100914QQrdZ1Q QcmdZViewItem

155-tbo
07-06-06, 16:49
Iīm looking for new clutch, but I need full clutch kit. This is only plate?
And itīs sintered, is it?

Has anybody put sintered plate on Q4. How it works? I mean daily triving etc etc.

Steve Webb
07-06-06, 17:35
Yep that is just for the clutch plate, and its a solid one at that, so its going to be a little harsh for road use.
Just remember to change the release bearing when you change the clutch, if you are going to take everything apart, you might as well change all that you can.

Steve

155-tbo
07-06-06, 19:13
Yes, that was in my mind.
I will change all parts including clutch plate, release bearing and thrustplate. I was wondering that something better will be installed, when itīs open. Iīm looking for sinter or keramic plate with very heavy thrustplate so it will hold out my future modification.

Does anybody knows anything about better clutch kit? I have been contact with hörmann, but they only offer me sintered clutch kit. Iīm little worried about that, because I donīt know how it will work in my daily driving.

155-tbo
08-06-06, 19:48
Does anybody know fit tihis clutch set to -93 155 Q4 ?

CLICK ! (http://cgi.ebay.co.uk/LANCIA-DELTA-HF-TURBO-EVO-89-96-FAST-ROAD-CLUTCH_W0QQitemZ4646788929QQcategoryZ100914QQrdZ1Q QcmdZViewItem)

Juan AR155Q4
08-06-06, 22:50
Well, I put a syntherized clutch in my Q4. For daily driving it's not the best. It's harder (my left leg doesn't need to go to the gym). But I've get used to this.
The other thing it's tht when the clutch couples, it's not soft, I mean, it's look like you're learning how to drive. They told me that one the clutch it's settle down, will no longer be that way. Nowaday I have 1500 km from rebuilt and it's a little better.
I haven't forced it yet, but you really notice when the clutch couples in.
Would I recommend this kind of clutch? Only if you have serious mods in your car, otherway, it's just a pain.

PS: I hope you could understood my explanation, it's really difficult to me to put it in english words.
PS2: Lancia delta's the same as the Q4. Go for it!

Edit: here're some pics:
http://img167.imageshack.us/img167/6501/p90801879xi.jpg
http://img392.imageshack.us/img392/3566/p90801881nq.jpg

155-tbo
09-06-06, 14:44
Yes, I understand your english very well and I think that is my clutch :mrgreen: My car doesnīt have that 350 hp, yet! Not even close, but it will be some day and that`s one reason why I want made my clutch better.

Doesnīt mather how tight and tough it is. Only what matters is that it last 8) I have very strong left foot :wink:

Thanks for information.

EDIT: What clutch kit is in the pictures that you post?

FletchQ4
09-06-06, 19:29
the clutch you posted a link to from techniclutch from ebay is what i have in mine with no probs so far but im standard power and havent pushed too hard yet.

oh and its just a Valeo one painted :roll:

155-tbo
09-06-06, 20:04
oh and its just a Valeo one painted :roll:

Thanks for that! Thatīs not what Iīm looking for...

Negative Creep
19-08-06, 15:15
how difficult is a clutch change? Ill hvt odo mine in the forseeable future, is it an engine out job?

Steve Webb
21-08-06, 17:46
Not an engine out job, but gearbox/torquesplitter obviously . Jack (alfajack) has just changed a clutch, but that was with the engine on a bench.

Not particularly difficult, but heavy and fiddly.

Steve

Juan AR155Q4
21-08-06, 18:51
Yes, I understand your english very well and I think that is my clutch :mrgreen: My car doesnīt have that 350 hp, yet! Not even close, but it will be some day and that`s one reason why I want made my clutch better.

Doesnīt mather how tight and tough it is. Only what matters is that it last 8) I have very strong left foot :wink:

Thanks for information.

EDIT: What clutch kit is in the pictures that you post?

It's not a "of the shelf" one, was made by the shop for my car. They make special clutchs.

155-tbo
14-09-06, 16:07
Old topic up!

Now it is time to change my clutch. All the parts what included on clutch. I have little problem, because one German shop wants to offer me 235mm disc (sinter metal), pulling type plate and bearing.

I have told my self that Q4 has 228 mm disc and pulling type plate. Am I right? My car is -92. Ofcourse this is Grale clutch, but it has to suit in Q4.

Only what confuse me is that disc 228 or 235 ?? And is it pulling or pushing ??

Q4STHLM
03-10-06, 19:33
I am fairly convinced that it's a 228mm.

There is a Helix clutch kit at Evocars.com. A bit expensive but it is ok if it's worth it. Anyone here who have tried it?

Btw, Techniclutch's still got a great offer here (http://cgi.ebay.co.uk/LANCIA-DELTA-HF-TURBO-EVO-89-96-FAST-ROAD-CLUTCH_W0QQitemZ4653500069QQihZ002QQcategoryZ10091 4QQrdZ1QQcmdZViewItem#ebayphotohostingurl)

FletchQ4 -You were satisfied with Techniclutch one, right? Do you think it can handle around 320bhp/370Nm of torque?

FletchQ4
05-10-06, 22:27
Yep im still happy with it and he is a nice guy but thought the wording of the ad is a little bit off as this is just the standard clutch and not an uprated item, unless its the valeo uprated one which id been warned away from. They have just painted part of the clutch :? as far as handling more power than standard i think the normal valeo one is good for upto 300bhp anyway. Im pretty sure the standard valeo can be bought cheaper. But yes im happy. :wink:

FletchQ4
05-10-06, 22:29
Here
http://ww5.aitsafe.com/cf/add.cfm?userid=7683579

hope the link works but this is the first site i tried.

FletchQ4
05-10-06, 22:41
just noticed this :?


Make : Alfa Romeo
Model : 155
Engine Size : 2.0 16V Turbo Cloverleaf 4
Year range : Apr-92 - Apr-96
Extra notes : Version No: 167A2B /C/E Diameter [mm]: 240

Part number : LUK-624148900
Cost price : 142.56 + v.a.t


note the size 240mm :?

AlfaJack
05-10-06, 22:51
Link dont work m80 :?

FletchQ4
05-10-06, 23:18
:D

http://www.buypartsby.co.uk/clutch_kit_display.php?txtmodel=155&Submit=Next&txtmake=ALFA%20ROMEO

FletchQ4
05-10-06, 23:21
Although ive just noticed that site says its the same part number for the 2.5 TD 155 :?

markgq4
13-11-06, 22:15
bit late i know but it probably is the same clutch assembly as diesels tend to have heavyduty everything...

tho it may not be so good if you have a chipped/modded Q4