PDA

View Full Version : Adjust belts to ac/servo?



elCrillo
22-06-14, 17:48
I keep losing my mind ... How to adjust the belt tension on the belts between the flywheel and the ac compressor and the belt between it and the power steering pump!? I've managed to unload a lot of screws and moved the ac compressor and just managed to get the belt on, but the belt for the power steering pump is loose and I can find no adjustment...:blink:
It's a little tight and my hands are too big.:wah:

Evodelta
24-06-14, 08:33
This job is better done standing under the car with it in the air, have you looked at the manuals stored on this site? It will be there, one shot is on P01 - 140 of the engine manual, there will probably be more in other sections.
To describe it would be like trying to show you how to find a needle in a haystack.

elCrillo
24-06-14, 16:33
See page 01-52 ... I have managed to adjust the ac compressor. But the power steering pump is fixed, how many bolts as I unload ... I feel a bit stupid ...

elCrillo
15-07-14, 19:07
Jiha! Now I have managed to adjust the belts! The powersteeringpump adjustment had oxidized solid, so with "little" violence it loose and it was possible to adjust the belts!