Identifying a Tipo 16v inlet cam

[Leo]

Does anybody know what markings a Tipo 16v cam should have ? Mine is stamped A6 and has the numbers 466 as well as two painted bands one green and one yellow.
When I tried to measure it with Calipers it doesn't correspond to what I was expecting although the lobe length is around 0.5mm longer than the standard cam.

[colibry]

correct cam from tipo 16v is 7697190 ( lift 10.150mm )

[Leo]

Thanks - There is no Fiat Part Number - but there is more lift than the stock cam - and my rough measurements came to around 0.5mm more than the standard stock cam so that seems to make sense.

[colibry]

The camshaft that u have is from AJUSA company ( They are marking like u said ) . Try contact with them and ask for details.

[Leo]

Thank you for this information