View Full Version : Green V6 skinny :: 1996 Alfa Romeo
alfa155chris
12-02-13, 21:40
Green V6 skinny :: 1996 Alfa Romeo (2013-02-12 21:40:53)
alfa155chris
12-02-13, 21:49
This has been sitting on a 155.org members drive for a year.
Towed it home with the 155 20vt.
Got it running and pumped 2 tyres up before towing it home.
Needs new thermostat, temp sensor fitting these bits where supplied with it, ordered new fan switch will fit and run up with new anti-freeze.
Needs n/s lower arm, n/s track rod end and a pair of rear calipers. Got new disc's and pads to fit all round for it.
Mot next week
alfa155chris
15-02-13, 21:14
Fitted the new temp sensor and new fan switch today
alfa155chris
16-02-13, 19:38
Fitted the new thermostat and filled with anti freeze then I ran it up
Steve Webb
17-02-13, 10:54
Good to see its going back into action. Any more problems come to light after you got it up to temp?
Varypodaros
17-02-13, 18:12
make it 20vt. :D
alfa155chris
17-02-13, 22:52
Good to see its going back into action. Any more problems come to light after you got it up to temp?
No it was sitting running for about a hour
Steve Webb
18-02-13, 09:29
No it was sitting running for about a hour
That goes to show why the V6 design has hung around for so long, nice and reliable even when its been neglected.
alfa155chris
18-02-13, 18:12
Started it up to find its now got a misfire and moved it on the drive as I've started to strip the rusty prugna
alfa155chris
02-03-13, 21:36
New disc's and pads all round, both lower arms nearly new from the prugna, 2 new drop links and new nearside track rod end.
Fitted the std V6 alloys and orange repeaters
G3 compounded and mopped it today.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.