PDA

View Full Version : Q4 Eibach springs code numbers.


Steve Webb
22-02-12, 19:46
Someone asked today if I knew the code numbers printed on the Eibach springs for the Q4.
Had a quick search and have come up with these:

Eibach Pro-Kit 4907.140
Spring stamping front: EW 4907001 VA
Spring stamping rear: EW 3010002 HA

Can anyone confirm these numbers?
Steve Webb
23-02-12, 21:41
Right it looks like there are 3 sets of numbers on eibach springs, does anyone know what each number is for?
One of the members needs some confirmation for an homologation issue.


http://www.berlinasportivo.com/forumpics/Alfa 145 QV.jpg
Xti
24-07-12, 13:06
Do you guys know if this Q4 Eibach kit would go for 155 1,8 TS too ? Or at least the front springs... Thanks in advance for infos.
colibry
24-07-12, 13:56
only 2.5 V6 and Q4 have same springs and shocks. TS is no go.
Suzumushi
24-07-12, 16:12
only 2.5 V6 and Q4 have same springs and shocks. TS is no go.

rear springs have the same part number
front spings are stiffer and have other than TS versions numbers.

ps. i've got one on the car but it's almost impossible to read them.

regards
w
Xti
25-07-12, 14:07
rear springs have the same part number...

regards
w

While I was checking 155 and 155 Q4 manuals I've seen that Q4 has rear springs =13,9 mm "cable dimensions" but the 155 ("All models") has 12,4 mm "wire diameter) for rear coils. So...:unsure::?

Does anybody have 155 Q4 rear springs at hand for wire diameter measurement please? Thanks in advance!

Cheers,
Cris.
Steve Webb
26-07-12, 09:03
Hi Cris,

I've got a set of original springs down in the garage, I'll measure them up for you today.
Steve Webb
26-07-12, 22:58
While I was checking 155 and 155 Q4 manuals I've seen that Q4 has rear springs =13,9 mm "cable dimensions" but the 155 ("All models") has 12,4 mm "wire diameter) for rear coils. So...:unsure::?



Just been down and measured the rear springs with a vernier caliper, got readings between 13.85 and 14mm.

There is a little corrosion on the springs so I'd say standard Q4 springs are 13.9 mm
Xti
27-07-12, 13:21
My appreciation for the effort, Steve.:thumb: Thank you!

Cheers,
Cris.
Integrale
28-05-14, 00:22
I tought the Eibach pro kit was out of production long time ago, but on Ebay there is a seller that offer springes only for Q4, Anyone know's about that?
Is'ent this set a go one for 155 Q4
wrinx
28-05-14, 08:42
Do you have a link?

wrinx
Integrale
28-05-14, 16:33
http://www.ebay.com/sch/i.html?_nkw=alfa+155+springs&_pgn=2&_skc=50&rt=nc
Integrale
28-05-14, 16:37
Good Morning

Many thanks for your enquiry

We can confirm that this kit is the only Eibach Pro Spring Kit listed for all Alfa 155 Models but it doesn't mention anything about the Q4 part.

Shipping of 1 this item to Norway would cost £34.45 GBP

Regards
Eric

So then its possible only for 2.0TS, have to look more into it on work tonight :)
Integrale
28-05-14, 16:37
Good Morning

Many thanks for your enquiry

We can confirm that this kit is the only Eibach Pro Spring Kit listed for all Alfa 155 Models but it doesn't mention anything about the Q4 part.

Shipping of 1 this item to Norway would cost £34.45 GBP

Regards
Eric

So then its possible only for 2.0TS, have to look more into it on work tonight :)
alfacorse155
09-02-15, 18:29
Hi Guys!


Does anybody now where i can order new lowering springs from Eibach for my Q4?

Are there other springs which are available (-30mm)?


Thanks for your help!
Christian
alfacorse155
10-02-15, 17:37
Hi Guys!


I just contacted Eibach today, but the lowering springs for the Q4 are not available any more.


So i found this spanish side in the net:
http://www.kptuning.com/kit-muelles-eibach-325-cm-para-alfa-romeo-155-92-97-p-11522.html


Is there anybody from spain who can help me to order these springs?


Yours Chris
alfacorse155
11-02-15, 22:13
Good afternoon!


Found also a page from polen (1014.140):

http://www.rajdy.hoga.pl/sklepy/rako/default.asp?s=27&k=0&qt=


Is there anybody from polen, who will help me?


Yours Christian
kunev
04-09-17, 08:43
Here is a picture of my old front springs, just for information for the forum (I give up to clear them more)
2804
I find Eibach number EW 4907001 VA to be used for other italian cars from same period.
And here is something very interesting that I found accidentally. Look like TUV for Eibach springs for 155 Q4 :)
2805

Currently rear Eibach springs are on the car, but soon they have to be changed and will post them also for reference.